Also known as 白色 SLA, 白色 Resin, Accura Xtreme 白色 200

SLA射门角度®播放器™ 200

Stereolithography [SLA]

材料信息

十博app下载 SLA射门角度®播放器™ 200

Accura Xtreme 200 is an ultra-tough white acrylate-based plastic. This photopolymer resin plastic has excellent strength, 耐用性, 表面光洁度, and dimensional accuracy.

 

Color & 完成

白色
标准
This includes support removal and light sanding to remove nubs, although some markings from supports may remain.

技术

  • Stereolithography [SLA]

技术文件

材料特性

Tensile modulus (ASTM D638)
2300 - 2630 MPa
Tensile strength (ASTM D638)
45 - 50 MPa
Elongation at break (ASTM D638)
7-20 %
Temperature of deflection under load (0.45 MPa) (ASTM D648)
47°C

描述

材料了
high strength, good dimensional accuracy, good 表面光洁度

设计指导方针

边界框

边界框马克斯
尺寸:609 x 711 x 457 mm

边界框最小
3.8 x 3.8 x 3.8 mm

The bounding box is a 十博app下载 imaginary outline of a box that encloses the smallest area occupied by your model. Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.

支持ed Wall Thickness 最小值
0.4 mm
Unsupported Wall Thickness 最小值
0.5 mm
A supported wall is connected at least on two sides of the wall, while an unsupported wall is connected only on one side of the wall. 墙 that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wall geometry of the model. Please consider the size of your model and reinforce the walls or add support structures as needed as minimum guidelines will not always be adequate for large models.

电线

支持线分
0.5 mm
不支持的电线敏
0.6 mm
导线是圆形的, rectangular or even triangular feature that is thinner in its unconnected directions than its length. A supported wire is connected at least on two sides of the model, while an unsupported wire is connected on one side of the model. 电线 that do not meet the minimum requirements may not survive printing and cleaning processes. Additionally, models may still be rejected based on the wire geometry of the model. Please consider the size of your model and reinforce the wires or add support structures as needed as minimum guidelines will not always be adequate for large models.

Details

分钟浮雕细节
0.3毫米高 & 0.4毫米宽
最小细节雕刻
0.3毫米深 & 0.3毫米宽
用于文本, the ratio between width and depth, should be 1:1 and sans-serif fonts are preferred for line weight consistency.

逃离黑洞

Single Escape Hole Diameter (最小值)
5.0 mm
Multiple Escape Hole Diameter (最小值)
4.0 mm
Escape holes are necessary to empty the support material of a hollow model. Two escape holes at the opposite ends of the model is optimal for the support removal process. Please consider the size of your model and make the escape holes bigger or add more escape holes as needed as minimum guidelines will not always be adequate for large models.
A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.

间隙

最小值
0.3 mm
间隙 is the space between two individual parts in a model. If the space among the individual parts do not meet the minimum clearance, then parts can fuse together or can be difficult to clean. This is important for movable pieces like hinges, gears, etc.

浇口

1.3 mm diameter (or thinnest dimension if not circular)

浇口 are wires that keep two or more parts together. Parts should be connected with a minimum of two sprues each. Please consider the size of your sprues and increase them as needed as minimum guidelines will not always be adequate for large models. If the sprues are within the guidelines and are broken, but there is no damage to your model, we will still ship them as is.

联锁 & 封闭的部分

联锁
No

随信附上
No

部分文件

马克斯
250

精度

精度 ±0.2% (with a lower limit of ±0.2 mm)
For example: a product with dimensions of 50 x 50 x 100 mm can be 0.002*100 mm = 0.2 mm bigger or smaller in any direction.

相关材料

Also known as Clear Plastic, Clear SLA, Translucent Resin
SLA塑料Accura®60
应用程序: 照明组件, fluid flow visualization models, 技术附件, 原型, 显示模型, snap-fit总成
了解更多→
Also known as Gray SLA, Gray Resin
SLA射门角度®播放器™
应用程序: 情况下, 机械零件, 技术附件, 功能原型, 显示模型, snap-fit总成
了解更多→

Stay up to date on promotions, case studies, and more.